Accessories and parts for CPAP ResMed

Accessories and parts for CPAP ResMed 

  • 99,00 €
    The HumidAir™ humidifier is part of ResMed's Climate Control solution for the AirSense™ 10 and AirCurve™ 10 series of devices.  For a comfortable humidity level, add a HumidAir humidifier to your device.  It is designed to seamlessly integrate with the device and offer relief from dryness and congestion.  The HumidAir is incredibly simple to use. The...
  • 93,60 €
    A great addition to the Airsense™ 10 and AirCurve™ 10 line by ResMed, the ClimateLineAir™ Heated Tube provides optimal humidity comfort by monitoring temperature levels all the way to the mask allowing the machine to compensate as ambient conditions change. An innovative swivel connection at the machine also helps with movement during the night. 
  • 36,50 €
    The AirSense 10, AirCurve 10, and S9 Series CPAP machines come standard with the ResMed SlimLine Tubing. The 15mm, small diameter air tube is ultra-light, flexible and provides a unique alternative to bulky, generic 6 foot hoses.
  • 21,31 €
    Replacement filters for the Resmed S9 and AirSense™ 10 Series CPAP machines. Foam filters are an essential component for your CPAP therapy due to their ability to remove irritating dust, pollen, and tobacco smoke particles from your CPAP airflow.  The package includes a single filter. 
  • 89,50 €
    The DC Converter 24V 90W For AirSense™ 10 and AirCurve™ 10 Machines by ResMed connects the AirSense™ 10 and AirCurve™ 10 to a 12V or 24V battery power source, including the battery used in a boat, car or recreational vehicle. The converter can be used to power the AirSense™ 10 and AirCurve™ 10 machine with built in HumidAir™ humidifier as well as a...
  • 99,50 €
    90W 100-240V EU AC Power Supply with Power Cord for AirSense™ 10 & AirCurve™ 10 CPAP & BiLevel Machines.  Compatible with all AirSense™ 10 & AirCurve™ 10 CPAP & BiLevel Machines.  Power Consumption:~ 50 Watts (average) (~30 Watts when operating with the Machine, ~90 Watts when operating with the Machine and with the HumidAir Heated...
  • 114,40 € In Stock
    The package includes a USB module for direct monitoring through cable of the therapy with ResMed CPAP and BiPAP devices Airsense 10 and AirCurve 10 models. Warning: monitoring works with AirView software only.
  • 156,00 € In Stock
    The oximeter adapter connects a NONIN Xpod oximeter to your device. Oximetry data (oxygen saturation and pulse rate) is recorded on the SD card inserted into the device. The Air10 oximeter adapter shown in illustration A is compatible with AirSense 10 / AirCurve 10 devices. Associated accessoriesXpod oximeter Xpod fixation clip Finger pulse sensor...
  • 51,99 €
    The Side Cover For AirSense™ 10, AirStart™ 10, and AirCurve™ 10 Machines by ResMed allows the AirSense™ 10, AirStart™ 10, and AirCurve™ 10 line of machines to be used without engaging the built-in heated humidifier. The side cover is attached to the side of the machine where the chamber would otherwise fit. The side cover is available in one of two...
  • 51,99 €
    The Side Cover For AirSense™ 10, AirStart™ 10, and AirCurve™ 10 Machines by ResMed allows the AirSense™ 10, AirStart™ 10, and AirCurve™ 10 line of machines to be used without engaging the built-in heated humidifier. The side cover is attached to the side of the machine where the chamber would otherwise fit. The gray is designed for the lighter colored...
  • 67,59 €
    The ResMed AirSense™ 10 and AirCurve™ 10 Travel Bag holds the AirSense™ 10 and AirCurve™ 10 machine along with the HumidAir™ integrated heated humidifier, hose, and power supply. The bag has both a carry handle and an adjustable shoulder strap. A handy strap across the back of the bag allows it to be slipped over the handle of a rolling suitcase. The bag...
  • 67,59 €
    The ResMed AirSense™ 10 and AirCurve™ 10 Travel Bag holds the AirSense™ 10 and AirCurve™ 10 machine along with the HumidAir™ integrated heated humidifier, hose, and power supply. The bag has both a carry handle and an adjustable shoulder strap. A handy strap across the back of the bag allows it to be slipped over the handle of a rolling suitcase. The bag...
  • 20,80 €
    The Humidifier Chamber Air Outlet for ResMed AirSense™ 10 and AirCurve™ 10 Series CPAP and BiLevel Machines is the replacement air outlet elbow for the AirSense 10 and AirCurve 10 line of CPAP and bilevel machines when the existing outlet has been damaged. This air outlet is available in one color only. It is for use with the following machines:...
  • 67,59 €
    The Power Supply Unit (PSU) Adapter for AirSense™ 10 and AirCurve™ 10 Machines for ResMed Power Station (RPS) II is required to charge the RPS II. The PSU connects the RPS II to the External 90 Watt Power Supply for ResMed AirSense™ 10 and AirCurve™ 10 Series CPAP and BiPAP Machines. The following AirSense™ 10 and AirCurve™ 10 machines are compatible with...
  • 28,60 €
    ResMed Gecko™ Nasal Pad - Accessory.  Nasal pad made of non-toxic material, for use with nasal masks and full face masks.  It prevents and reduces the appearance of skin lesions on the bridge of the nose and face, due to an intensive use of the mask.  It increases comfort when using the mask. Improves the mask seal reducing leaks.  Available in two sizes:...
  • 20,80 €
    The SD card protective folder enables your patient to safely send you the therapy data card from their S9 and AirSense 10 devices. The SD card gathers and stores data during your patient's S9 therapy. When you need to assess and monitor treatment, simply ask your patient to remove the card, put it in the SD Card Protective Folder, and send it back to you.

No products

To be determined Shipping
0,00 € Total

Check out