Cushion for AirFit N10 - ResMed

The Cushion for AirFit™ N10 Nasal CPAP Mask is the replacement cushion for the following masks:

  • AirFit™ N10 Nasal CPAP Mask with Headgear
  • AirFit™ N10 For Her Nasal CPAP Mask with Headgear

This is the cushion only and does not include any other products. This cushion will only work with the masks listed above, it is not compatible with any others.

Cushion Clip Note

The AirFit™ cushion is permanently attached to a clear acrylic clip and the two cannot be separated.

Cushion Size and Orientation

The size of the cushion is written in small, black letters which are printed on the bottom of the cushion.

To ensure the cushion is properly connected to the mask frame, locate two small clips on the other side of the cushion. Use the clips to attach the cushion to the mask frame. The larger cushion clip needs to be upright, connecting at the top of the opening. The smaller clip found near the base of the cushion will attach at the bottom of the opening.

More details

New product

39,78 €

  • S (small)
  • W (wide)
  • Standard

- +

 
More info

The Cushion for AirFit™ N10 Nasal CPAP Mask is the replacement cushion for the following masks:

  • AirFit™ N10 Nasal CPAP Mask with Headgear
  • AirFit™ N10 For Her Nasal CPAP Mask with Headgear

This is the cushion only and does not include any other products. This cushion will only work with the masks listed above, it is not compatible with any others.

Cushion Clip Note

The AirFit™ cushion is permanently attached to a clear acrylic clip and the two cannot be separated.

Cushion Size and Orientation

The size of the cushion is written in small, black letters which are printed on the bottom of the cushion.

To ensure the cushion is properly connected to the mask frame, locate two small clips on the other side of the cushion. Use the clips to attach the cushion to the mask frame. The larger cushion clip needs to be upright, connecting at the top of the opening. The smaller clip found near the base of the cushion will attach at the bottom of the opening.

Write a review

Cushion for AirFit N10 - ResMed

The Cushion for AirFit™ N10 Nasal CPAP Mask is the replacement cushion for the following masks:

  • AirFit™ N10 Nasal CPAP Mask with Headgear
  • AirFit™ N10 For Her Nasal CPAP Mask with Headgear

This is the cushion only and does not include any other products. This cushion will only work with the masks listed above, it is not compatible with any others.

Cushion Clip Note

The AirFit™ cushion is permanently attached to a clear acrylic clip and the two cannot be separated.

Cushion Size and Orientation

The size of the cushion is written in small, black letters which are printed on the bottom of the cushion.

To ensure the cushion is properly connected to the mask frame, locate two small clips on the other side of the cushion. Use the clips to attach the cushion to the mask frame. The larger cushion clip needs to be upright, connecting at the top of the opening. The smaller clip found near the base of the cushion will attach at the bottom of the opening.

Write a review

30 other products in the same category:

No products

To be determined Shipping
0,00 € Total

Check out